ADCRYL™ · Solvent acrylic PSA
AP 1765
A two-component, high-solids, high-performance solvent acrylic PSA at a coatable viscosity, for curved surfaces, plastics, PU, PE and cross-linked foams, and double-face tapes. Mix 100 parts adhesive to 1 part Advance Hardener.
Typical properties
- Solids
- 64 ± 2% 150 °C, 90 min
- Viscosity
- 50 – 90 P Brookfield RVD11, spindle 5, 10 rpm, 25 °C
- 180° peel adhesion
- 2500 ± 10% gf/25 mm PSTC-101, stainless-steel plate
- Loop tack
- 2000 – 2500 gf/inch
- Rolling-ball tack
- 17 – 20 cm PSTC-106
- Shear
- > 18 h PSTC-107, 25 × 25 mm, 1 kg
We measured these values in our own laboratory according to PSTC methods: 180° peel on a stainless-steel plate, with the adhesive coated on 1 mil PET at 25 ± 2 gsm. Viscosity is measured with a Brookfield RVD11 viscometer, spindle 5, at 10 rpm and 25 °C.
Recommended for
Foam substrates; XLPE, PE, PP, Alu foil tape, Alu foam tape etc.
Catalogue note: 2 components, high solids & high performance
Adhesives by application: Double-sided tapes · Foam tapes · Aluminium foil tapes
From the datasheet
These are the supply and handling details the ADCRYL™ AP 1765 datasheet gives.
| Appearance | Transparent viscous liquid |
| Solvents | Ethyl acetate, Isopropyl alcohol, Toluene |
| Full cure at room temperature | Up to 24 h |
| Substrates | XLPE, PE, PU foam, PET, PP films, paper, synthetic fabrics, foils |
| Packing | 200 kg drums |
| Storage and handling | Below 35 °C |
| Shelf life | 6 months |
Using it
- First, dilute with ketones, aromatic hydrocarbons or esters; mixes of aliphatic hydrocarbons can also be used. Solvents must be anhydrous.
- Finally, dry the coating thoroughly in the coating machine: residual solvent lowers the adhesive's performance.
What is ADCRYL™ AP 1765?
ADCRYL™ AP 1765 is a two-component, high-solids, high-performance solvent acrylic PSA at a coatable viscosity, for curved surfaces, plastics, PU, PE and cross-linked foams, and double-face tapes. Mix 100 parts adhesive to 1 part Advance Hardener, made by Advance Adhesives Private Limited in Belagavi, India. Recommended applications: foam substrates; XLPE, PE, PP, aluminium foil tape, aluminium foam tape etc. Typical values are 64 ± 2% solids, a viscosity of 50 – 90 poise, 180° peel adhesion of 2500 ± 10% gf/25 mm (PSTC-101, stainless-steel plate), loop tack of 2000 – 2500 gf/inch, rolling-ball tack of 17 – 20 cm (PSTC-106) and shear resistance of more than 18 hours (PSTC-107, 25 × 25 mm, 1 kg). Appearance: transparent viscous liquid. It is supplied in 200 kg drums and has a shelf life of 6 months. Datasheets, safety data sheets and samples are available from the Advance Adhesives sales team.