ADCRYL™ · Solvent acrylic PSA
AP 3065
A single-pack, high-performance, self-cross-linking solvent acrylic PSA at a coatable viscosity, for foam substrates.
Typical properties
- Solids
- 64 ± 2% 150 °C, 90 min
- Viscosity
- 30 – 80 P Brookfield RVD11, spindle 5, 10 rpm, 25 °C
- 180° peel adhesion
- 3000 ± 10% gf/25 mm PSTC-101, stainless-steel plate
- Loop tack
- 2000 – 2500 gf/inch
- Rolling-ball tack
- 20 – 25 cm PSTC-106
- Shear
- —
We measured these values in our own laboratory according to PSTC methods: 180° peel on a stainless-steel plate, with the adhesive coated on 1 mil PET at 25 ± 2 gsm. Viscosity is measured with a Brookfield RVD11 viscometer, spindle 5, at 10 rpm and 25 °C.
Recommended for
Foam substrates; XLPE, PE, PP etc.
Catalogue note: High peel
Adhesives by application: Foam tapes
From the datasheet
These are the supply and handling details the ADCRYL™ AP 3065 datasheet gives.
| Appearance | Transparent viscous liquid |
| Solvents | Ethyl acetate, Isopropyl alcohol, Toluene |
| Full cure at room temperature | Up to 24 h |
| Substrates | XLPE foam, PE foam, PET, PP films, paper, synthetic fabrics, foils |
| Packing | 200 or 225 kg drums |
| Storage and handling | Below 35 °C |
| Shelf life | 6 months |
Using it
- First, dilute with ketones, aromatic hydrocarbons or esters; mixes of aliphatic hydrocarbons can also be used. Solvents must be anhydrous.
- Finally, dry the coating thoroughly in the coating machine: residual solvent lowers the adhesive's performance.
What is ADCRYL™ AP 3065?
ADCRYL™ AP 3065 is a single-pack, high-performance, self-cross-linking solvent acrylic PSA at a coatable viscosity, for foam substrates, made by Advance Adhesives Private Limited in Belagavi, India. Recommended applications: foam substrates; XLPE, PE, PP etc. Typical values are 64 ± 2% solids, a viscosity of 30 – 80 poise, 180° peel adhesion of 3000 ± 10% gf/25 mm (PSTC-101, stainless-steel plate), loop tack of 2000 – 2500 gf/inch and rolling-ball tack of 20 – 25 cm (PSTC-106). Appearance: transparent viscous liquid. It is supplied in 200 or 225 kg drums and has a shelf life of 6 months. below 35 °C. We measured peel, tack and shear in our own laboratory according to PSTC methods, with the adhesive coated on 1 mil PET at 25 ± 2 gsm. Datasheets, safety data sheets and samples are available from the Advance Adhesives sales team.