ADCRYL™ · Solvent acrylic PSA
AP 1063
A two-pack, crosslinking solvent acrylic PSA with higher peel strength and high tack. Crosslink with 0.5–1% Advance Hardener or another commercial hardener. Miscible with pigments.
Typical properties
- Solids
- 51 ± 2% 150 °C, 90 min
- Viscosity
- 35 – 50 P Brookfield RVD11, spindle 5, 10 rpm, 25 °C
- 180° peel adhesion
- 2000 ± 10 gf/25 mm PSTC-101, stainless-steel plate
- Loop tack
- —
- Rolling-ball tack
- 8 – 10 cm PSTC-106
- Shear
- > 25 min PSTC-107, 25 × 25 mm, 1 kg
We measured these values without crosslinker, at 25 ± 2 gsm, as the March 2025 datasheet gives them.
Recommended for
Tapes and labels on PET, PP films, paper, synthetic fabrics and foils
Catalogue note: Two-pack, higher peel strength, high tack
Adhesives by application: PET, PP and coloured film tapes · Labels, decals, signage and window films
From the datasheet
These are the supply and handling details the ADCRYL™ AP 1063 datasheet gives.
| Appearance | Clear Transparent |
| Solvents | Ethyl acetate, Toluene |
| Full cure at room temperature | 10–12 h |
| Substrates | Tapes and labels; PET, PP films, paper, synthetic fabrics, foils |
| Packing | 200 or 225 kg drums |
| Storage and handling | Below 40 °C |
| Shelf life | 6 months |
Using it
- First, dilute with ketones, aromatic hydrocarbons or esters; mixes of aliphatic hydrocarbons can also be used. Solvents must be anhydrous.
- Finally, dry the coating thoroughly in the coating machine: residual solvent lowers the adhesive's performance.
What is ADCRYL™ AP 1063?
ADCRYL™ AP 1063 is a two-pack, crosslinking solvent acrylic PSA with higher peel strength and high tack. Crosslink with 0.5–1% Advance Hardener or another commercial hardener. Miscible with pigments, made by Advance Adhesives Private Limited in Belagavi, India. Recommended applications: tapes and labels on PET, PP films, paper, synthetic fabrics and foils. Typical values are 51 ± 2% solids, a viscosity of 35 – 50 poise, 180° peel adhesion of 2000 ± 10 gf/25 mm (PSTC-101, stainless-steel plate), rolling-ball tack of 8 – 10 cm (PSTC-106) and shear resistance of more than 25 minutes (PSTC-107, 25 × 25 mm, 1 kg). Appearance: clear transparent. It is supplied in 200 or 225 kg drums and has a shelf life of 6 months. Datasheets, safety data sheets and samples are available from the Advance Adhesives sales team.