# Adhesives for film lamination and holograms

> Solvent acrylic adhesives for film, PVC and carpet lamination and for hologram application, including a tack-free grade that dries bone dry. Samples on request.

Published by Advance Adhesives Private Limited (formerly Advance Polymers), a manufacturer of pressure-sensitive and contact adhesives in Belagavi, India, since 1995. Web page (canonical): https://www.advancepoly.com/applications/lamination-hologram-adhesive

A laminating adhesive is a bonding layer chosen for a lasting bond rather than for tack, because a laminate is meant to stay together. Our lamination grades run from AP 0140, with near-zero tack on metal, to AP 0132, a water-thin, tack-free adhesive for hologram application that also serves as a primer.

Made for: Film lamination; Hologram application; PVC lamination; Carpet and rough-surface lamination.

## What matters

### What does a laminating adhesive need?

A laminate is meant to stay together, so what counts is the strength of the joint once it has cured, not how sticky the adhesive feels. Some lamination grades are almost tack-free by design.

### Which grades coat thin and even?

Lamination and hologram work use thin layers. AP 0132 and AP 0140 are low-viscosity grades (0.2–1.0 poise) that lay down a thin, even film.

### Which grade dries tack-free for holograms?

Hologram application needs an adhesive that ends up completely dry to the touch. AP 0132 is a water-thin grade that is bone dry after curing, and it also works as a primer.

### What bonds fibrous and rough surfaces?

Fabric, board and carpet absorb a thin coat. AP 0140 bonds fibrous materials. For carpet and other rough surfaces, AP 1252R is listed in our carpet and rough-surfaces lamination category.

## Grades and typical values

| Grade | 180° peel | Loop tack | Shear | Solids | Page |
| --- | --- | --- | --- | --- | --- |
| AP 0132 | — | — | — | 30 ± 2% | https://www.advancepoly.com/products/adcryl-ap-0132 |
| AP 0140 | 250 ± 10% gf/25 mm | 150 – 250 gf/inch | > 75 h | 38 ± 2% | https://www.advancepoly.com/products/adcryl-ap-0140 |
| AP 1053P | 900 ± 10% gf/25 mm | 800 – 1000 gf/inch | > 2160 h | 51 ± 2% | https://www.advancepoly.com/products/adcryl-ap-1053p |
| AP 502 | 1200 ± 10% gf/25 mm | 1200 – 1400 gf/inch | > 2 h | 50 ± 2% | https://www.advancepoly.com/products/adcryl-ap-502 |
| AP 505 | 1300 ± 10% gf/25 mm | 800 – 1000 gf/inch | > 3 h | 50 ± 2% | https://www.advancepoly.com/products/adcryl-ap-505 |
| AP 1252R (two-pack) | 1100 ± 10% gf/25 mm | 900 – 1100 gf/inch | > 150 h | 53 ± 2% | https://www.advancepoly.com/products/adcryl-ap-1252r |

Indicative laboratory values: 180° peel on stainless steel, adhesive coated on 25 µm PET at 25 ± 2 gsm, PSTC methods; shear is a minimum.

## Which grade does what

- AP 0140: For film lamination; near-zero tack on metal, and bonds fibrous materials.
- AP 0132: For hologram application; 100% dry and tack-free after curing; also used as a primer.
- AP 1053P: Listed for PVC lamination; non-oozing with low shrinkage.
- AP 502: Listed for PVC lamination; general purpose, high tack.
- AP 505: Listed for PVC lamination; general purpose, high clarity.
- AP 1252R: Two-pack, high tack; carpet and rough-surface lamination, and carpet protection tape.

Substrates: Films, Fibrous materials, PVC, Carpet and rough surfaces.

## Summary

Advance Adhesives Private Limited, a manufacturer of adhesives in Belagavi, India, since 1995, makes six grades for film lamination and holograms: AP 0132, AP 0140, AP 1053P, AP 502, AP 505 and AP 1252R. They are made for film lamination, hologram application, PVC lamination and carpet and rough-surface lamination. The grades are used on films, fibrous materials, PVC and carpet and rough surfaces. We measured peel, tack and shear in our own laboratory according to PSTC methods, with the adhesive coated on 25 µm PET at 25 ± 2 gsm. A laminate is meant to stay together, so what counts is the strength of the joint once it has cured, not how sticky the adhesive feels. Some lamination grades are almost tack-free by design. Datasheets, safety data sheets, samples and quotations are available from the Advance Adhesives sales team.

## Related

- [Adhesives for surface-protection films and tapes](https://www.advancepoly.com/applications/surface-protection-film-adhesive)
- [Adhesives for labels, decals, signage and window films](https://www.advancepoly.com/applications/label-decal-adhesive)
- [Adhesives for PET, PP and coloured film tapes](https://www.advancepoly.com/applications/film-tape-adhesive)
- [Solvent acrylic, rubber or water-based? Choosing an adhesive](https://www.advancepoly.com/guides/choosing-psa-chemistry)
- [Peel, tack and shear: reading a PSA datasheet](https://www.advancepoly.com/guides/peel-tack-shear)

## How to buy or ask

- Request a sample: https://www.advancepoly.com/contact?request=sample&application=Film%20lamination%20and%20holograms#enquiry
- Request a quotation: https://www.advancepoly.com/contact?request=quote&application=Film%20lamination%20and%20holograms#enquiry
- Ask the technical team: https://www.advancepoly.com/contact?request=technical&application=Film%20lamination%20and%20holograms#enquiry
- Email info@advancepoly.com or call +91 97410 71212. Open Monday to Saturday.
- Prices are not published; the sales team quotes on request.

More: https://www.advancepoly.com/ai/index.md (site guide) · https://www.advancepoly.com/llms.txt